View B82422A3150K100_4572557.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1) Replace the + by the code letter for the required inductance tolerance. For reel size 330 mm the last digit has to be an 8. Example: B82422A3829K108 2) For Ni-barrier-plated terminals replace the last three digits "100" by "150" (reel 180 mm) or "158" (reel 330 mm).
Please read Cautions and warnings and Important notes at the end of this document.
5
06/09
SMT inductors, SIMID series SIMID 1210-100
Characteristics and ordering codes LR H Core material: ferrite 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 5%
^
B82422A*100
Tolerance
fL MHz
Qmin
fQ MHz
IR mA 380 370 340 290 270 240 200 190 150 140 135 130 180 175 165 155 140 120 105 90 85 85 80 70 65
Rmax 0.34 0.37 0.50 0.60 0.75 0.88 1.20 1.40 2.20 2.60 2.80 3.00 1.60 1.65 1.85 2.00 2.65 3.70 4.50 6.30 7.00 6.75 7.70 10.0 11.5
fres, min Ordering code 1)2) ( 180-mm reel) MHz 320 300 270 250 125 110 110 110 110 100 90 90 25 23 20 17 16 15 13 12 11 9 9 8 7 B82422A1102+100 B82422A1122+100 B82422A1152+100 B82422A1182+100 B82422A1222+100 B82422A1272+100 B82422A1332+100 B82422A1392+100 B82422A1472+100 B82422A1562+100 B82422A1682+100 B82422A1822+100 B82422A1103+100 B82422A1123+100 B82422A1153+100 B82422A1183+100 B82422A1223+100 B82422A1273+100 B82422A1333+100 B82422A1393+100 B82422A1473+100 B82422A1563+100 B82422A1683+100 B82422A1823+100 B82422A1104+100
J
^
1 K 1 1 1 1 1 1 1 1 1 1 1 1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
20 20 20 25 25 25 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27
7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52
10%
Closer tolerances and special versions on request. Higher currents possible at temperatures 1) Replace the + by the code letter for the required inductance tolerance. For reel size 330 mm the last digit has to be an 8. Example: B82422A1104K108 2) For Ni-barrier-plated terminals replace the last three digits "100" by "150" (reel 180 mm) or "158" (reel 330 mm).
Please read Cautions and warnings and Important notes at the end of this document.
6
06/09
SMT inductors, SIMID series SIMID 1210-100
Impedance |Z| versus frequency f measured with impedance analyzer Agilent 4291A, typical values at 20 C
B82422A*100
Inductance L versus DC load current IDC measured with LCR meter Agilent 4275A, typical values at 20 C
Q factor versus frequency f measured with impedance analyzer Agilent 4194A/4291A, typical values at 20 C
Current derating Iop/IR versus ambient temperature TA (rated temperature TR = 125 C)
7
06/09
Cautions and warnings
Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets. - Particular attention should be paid to the derating curves given there. - The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation.
The following points must be observed if the components are potted in customer applications:
- Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. - It is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. - The effect of the potting material can change the high-frequency behaviour of the components.
Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and Important notes at the end of this document.
8
06/09
Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 9 06/09

SMT inductors
SIMID series, SIMID 1210-100
Series/Type: Date: B82422A*100 June 2009
7ffARspp
(c) EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
SMT inductors, SIMID series SIMID 1210-100
Size 1210 (EIA) or 3225 (IEC) Rated inductance 0.0082 NH to 100 NH Rated current 65 mA to 800 mA Construction
Ceramic or ferrite core Laser-welded winding Flame-retardant molding
B82422A*100
Features Temperature range up to 145 C High Q factor High resonance frequency Qualified to AEC-Q200 Suitable for lead-free reflow soldering as referenced in JEDEC J-STD 020C RoHS-compatible

Applications

Filtering of supply voltages, coupling, decoupling Antenna systems Automotive electronics Telecommunications Consumer and data processing equipment Industrial electronics
Terminals
Base material CuSn6 Layer composition Cu, Ag, Sn (lead-free)1) Electro-plated
Marking
Marking on component:
Manufacturer, L value (in nH), tolerance of L value (coded), date of manufacture (YWWD) Minimum data on reel: Manufacturer, ordering code, L value, quantity, date of packing Delivery mode and packing units
8-mm blister tape, wound on 180-mm or 330-mm reel Packing units:
180-mm reel: 2000 pcs./reel 330-mm reel: 8000 pcs./reel
1) Ni-barrier-plated terminals on request (B82422A*150).
Please read Cautions and warnings and Important notes at the end of this document.
2
06/09
SMT inductors, SIMID series SIMID 1210-100
Dimensional drawing and layout recommendation
0.50.2 1)
B82422A*100
20.11)
B
C D
B
IND0053-6
3.2+0.3
20.1
1) 0.4 min.
A 2.7
B 1.15
A
C 2.1
D 4.4
0.15 max.
2.5+0.3
Marking
1) Soldering area
IND0073-6-E
Dimensions in mm
Taping and packing Blister tape
1.750.1
40.1 Component 1.5+0.1 20.05
Reel
14.4 max.
_0 12.75 +0.15
3.50.05
_2 180 +0
_ < 4.2
80.3
_ < 2.6
40.1
1.0+0.2 Direction of unreeling
IND0559-Z-E
_0 8.4 +1.5
_2 330 +0
621.5
IND0592-V
Dimensions in mm
Please read Cautions and warnings and Important notes at the end of this document.
3
06/09
SMT inductors, SIMID series SIMID 1210-100
Technical data and measuring conditions Rated inductance LR Q factor Qmin Rated temperature TR Rated current IR
B82422A*100
Measured with impedance analyzer Agilent 4294A at frequency fL, 0.1 V, 20 C Measured with impedance analyzer Agilent 4294A at frequency fQ, 20 C 125 C Maximum permissible DC with inductance decrease L/L0 10% and temperature increase of 20 K at rated temperature Measured with network analyzer Agilent 8753D, 20 C Measured at 20 C Sn95.5Ag3.8Cu0.7: (245 5) C, (5 0.3) s Wetting of soldering area 90% (based on IEC 60068-2-58) 260 C, 40 s (as referenced in JEDEC J-STD 020C) 55/125/56 (to IEC 60068-1) Mounted: -55 C ... +125 C Packaged: -25 C ... +40 C, 75% RH Approx. 50 mg
Self-resonance frequency fres,min DC resistance Rmax Solderability (lead-free)
Resistance to soldering heat Climatic category Storage conditions Weight
Please read Cautions and warnings and Important notes at the end of this document.
4
06/09
SMT inductors, SIMID series SIMID 1210-100
Characteristics and ordering codes LR H Core material: ceramic 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 5%
^
B82422A*100
Tolerance
fL MHz
Qmin
fQ MHz
IR mA 800 750 700 640 640 600 600 540 530 510 500 480 450 440 400 390 360 280 235 200 190 150 150 145 140
Rmax 0.08 0.09 0.10 0.12 0.12 0.14 0.14 0.17 0.18 0.19 0.20 0.21 0.24 0.26 0.32 0.33 0.38 0.64 0.90 1.3 1.4 2.2 2.2 2.4 2.5
fres, min Ordering code 1)2) ( 180-mm reel) MHz 4000 4000 3500 3000 2500 2500 1850 1700 1450 1350 1200 1150 1050 1000 880 850 800 700 650 580 540 480 400 280 240 B82422A3829+100 B82422A3100+100 B82422A3120+100 B82422A3150+100 B82422A3180+100 B82422A3220+100 B82422A3270+100 B82422A3330+100 B82422A3390+100 B82422A3470+100 B82422A3560+100 B82422A3680+100 B82422A3820+100 B82422A3101+100 B82422A3121+100 B82422A3151+100 B82422A3181+100 B82422A3221+100 B82422A3271+100 B82422A3331+100 B82422A3391+100 B82422A3471+100 B82422A3561+100 B82422A3681+100 B82422A3821+100
J
^
10 K 10 10 10 10 10 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1
20 20 25 27 30 30 23 20 25 26 26 27 27 25 22 25 25 25 20 22 22 22 22 22 22
100 100 100 100 100 100 50 50 50 50 50 50 50 50 30 30 30 30 30 30 30 30 30 30 30
10%
Closer tolerances and special versions on request. Higher currents possible at temperatures

▲Up To Search▲

Price & Availability of B82422A3150K100

	To Download B82422A3150K100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .